Current location: Home » News Center » » News » FAQ » Head lamp attention

Head lamp attention

To remove and install, fuse or other parts, or do not use computer lights, to cut off the exchange and overload and ground protection.

Computer lights can not be exposed to rain or tidal wetlands.

UV (UV) radiation and bulb explosion

Computer lights must not be used when the lens and cover are missing or damaged.

When replacing the bulb, open the outer cover or remove the bulb, and let the computer light cool for at least 15 minutes. Wear gloves and safety glasses to protect your hands and eyes.

No direct light bulbs.

If damaged, worn or in bulb than life before replacement.

Fire prevention

Do not short circuit temperature control switch and fuse, fuse must be replaced with the same model.

At least 1 meters away from combustible material (such as fabric, wood, paper).

Computer lights from the lighting surface shall not be less than 1 meters.

At least 0.1 meters of space around the cooling and ventilation system.

There must be no shelter in front of the camera.

The surface of the computer will be very hot, and it should be cool for at least 5 minutes before it is processed.

Never modify the computer lights or install non night sun accessories.

The ambient temperature is not more than 40 degrees Celsius can not turn on the computer lights.

Falling injury prevention

You can't carry a computer light alone.

Hanging installation, to ensure that the lamp frame can withstand 10 times the weight of all computer light.

Make sure all the outer cover and mounting parts are stable, and use the safety rope.

When installing or removing the computer light, the work area is to prevent outsiders from entering.


Keywords in the article: Stage light,moving head light,home party,mini moving head light,street light,flood light
安徽快三一码遗漏 北京体彩11选5100期走势图 广东11选5app 广西十一选五开奖结果走势图 百度 超级大乐透玩法图解 福彩快乐十分就是赌博 山东11选5怎么玩 沪市股票指数 天津体彩十一选五开 124 百家乐胜追负退 陕西11选5万能8码